![]() ![]() However, We would have preferred more than the maximum range of 218 meters. Throw and flood are balanced, so the lamp is a typical all-rounder. ![]() All in all, the brightness and widths of the beams appear to be true. The 1100 lumens are brighter than a car headlight. The 0.4 lumens setting can be used when only low levels of light are needed- for example when camping with others in a tent so that not everyone is awakened…įor the evening walk with the dog, the 175 lumens setting is perfect. with 18 lumens (5.5 days), and Firefly, 0.4 lumens (74 days – 1585 hours). with 435 lumens (4.2 hours), Medium, with 175 lumens (11.8 hours), Low. The ThruNite TN12 has five different light levels: Turbo, with 1100 lumens (95min), High. But do the technical data correspond to the actual in-hand performance? What about the quality and workmanship of the light? The TN12 is produced from the Chinese manufacturer ThruNite- who has the absolute top values in the mid-price segment. You can enjoy a very good price with XX USD in terms of build quality, luminous quality, and manageability. The price-performance ratio is, in our opinion, very good. We recommend Fenix E35 for those who are looking for a small but super bright flashlight. But the Fenix E35 does well in this regard. Usually with a narrow housing diameter, one does not initially expect a long beam range. The Fenix E35 is a powerful mini-thrower which has a very good relationship between diameter and beam distance. – Follow-up costs: 18650 battery (+ charger) – Turbo mode steps down after 5 minutes to avoid overheating + Mini-Thrower: strong light range in relation to the price + Good price-performance ratio (at 1000 lumens) In order to prevent overheating, after 5 minutes of steady use in the highest mode, there is an automatic step down to the second highest level. We tested both possibilities, and we did not notice a brightness difference. The Fenix E35 is powered by a 18650 lithium-ion battery or 2 x CR123A batteries. This might be useful in a situation where you don’t want the light to automatically start in the brightest mode- for instance, camping in a tent where you don’t want to awaken others. In addition, the last brightness setting used is retained in the memory, so that the flashlight will automatically revert to that setting the next time it is used. A key lock prevents accidental activation. While one button on the side is responsible for the light levels, the other one serves to click through the special modes. There is one endcap switch, and two side switches. The lamp is a waterproof gem, IPX-8 standard (meaning it can be submerged in water deeper than 3 feet). The surface is anodized and error-free, and the reflector is smooth. The housing is made of aircraft aluminum. The glass lens is specially hardened and extremely clear, with anti-reflective coating. A Cree XP E-LED with a lifespan of 50,000 hours was installed in an SMO reflector. The light color is cool white without color differences. The E35 has a narrow spot and is more of a throw flashlight. This ensures a very uniform and constant brightness in the light cone. With the Fenix flashlight, the brightness of the light cone is digitally controlled. The brightness of 1000 lumens was particularly impressive: so bright as to probably dazzle a person in traffic. Both the 1000 lumens function and the beam range of 160 meters seemed very useful to us. In our test, we confirmed these performances. The performance criteria that are measured are lumen, beam distance, light intensity (in candela), and illumination duration. This standard, developed by the American National Standards Institute and the National Electrical Manufacturer’s Association ANSI/NEMA), ensures that the technical data of the lamp indicated on the packaging matches the actual performance of the flashlight. These specifications are the same as for the NiteCore flashlights according to the ANSI / NEMA FL-1 standard. The Fenix E35 has five brightness levels plus a strobe mode and an SOS mode. The small reflector produces a long-range beam shot that only a few flashlights can match. The relationship between the diameter of the lamp and the beam width is important in determining the quality of the beam shot. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |